Motorola MVME162P-242, Installation And Use Manual

Page: 20 / 134

1-2 Computer Group Literature Center Web Site
Hardware Preparation and Installation
1
Equipment Required
The following equipment is necessary to complete an MVME162P2
system:
❏
VME system enclosure
❏
System console terminal
❏
Operating system (and / or application software)
❏
Disk drives (and / or other I/O) and controllers
Connect any other equipment you
will be using. Connector Pin Assignments in Chapter 5.
For more information on optional devices and equipment, refer
to the documentation provided with the equipment.
Power up the system. Applying Power on page 2-3 .
Solving Startup Problems on page B-1 .
Note that the firmware initializes
and tests the board. Bringing Up the Board on page 2-5 .
You may also wish to obtain the 162Bug Firmware User’s
Manual, listed in the Related Documentation appendix.
Initialize the system clock. Debugger Commands on page 3-6 .
Examine and/or change
environmental parameters. Modifying the Environment on page 3-8 .
Program the board as needed for
your applications. Programmer’s Reference Guide, listed in the Related
Documentation appendix.
Table 1-1. Startup Overview (Continued)
What you need to do... Refer to...