Motorola MVME162P-242, Installation And Use Manual

Page: 60 / 134

2-14 Computer Group Literature Center Web Site
Startup and Operation
2
In many cases, you may wish to terminate a debugger command before its
completion (for example, during the display of a large block of memory).
Break allows you to terminate the command.
Diagnostic Facilities
The 162Bug package includes a set of hardware diagnostics for testing and
troubleshooting the MVME162P2. To use the diagnostics, switch
directories to the diagnostic directory.
If you are in the debugger directory, you can switch to the diagnostic
directory with the debugger command Switch Directories (SD). The
diagnostic prompt
162-Diag>
appears. Refer to the Debugging Package
for Motorola 68K CISC CPUs User’s Manual for complete descriptions of
the diagnostic routines available and instructions on how to invoke them.
Note that some diagnostics depend on restart defaults that are set up only
in a particular restart mode. The documentation for such diagnostics
includes restart information.