Motorola MVME162P-242, Installation And Use Manual

Page: 132 / 134

Index
IN-4 Computer Group Literature Center Web Site
I
N
D
E
X
jumper headers, location of 1-5
jumpers, backplane 1-24
L
LAN
controller modules supported C-1
interface 4-14
LEDs (light-emitting diodes) 2-1 , 4-18
local
bus 4-16
bus arbiter 4-17
bus timeout 4-16
resources for the processor 4-15
Local Area Network (LAN) interface 4-14
location monitors, processor 1-26
logical unit number (LUN) (see CLUN or
DLUN)
LUN (logical unit number) (see CLUN or
DLUN)
M
mapping, EPROM/Flash 1-14
MC2 DRAM size 1-15
MC2 sector registers 1-13 , 1-16
MC68040 or MC68LC040
cache memory 4-6
MPU 4-6
MCECC memory model 1-22
memory controller emulations (MC1/MC2)
1-20 , 1-21
memory options 4-7
memory requirements 3-3 , 3-11
microprocessor options 4-6
modifying switch settings 1-16 , 1-22
MPU options 4-6
MVME162Bug documentation E-1
MVME162P2
as network controller C-1
board specifications A-1
cooling requirements A-2
EMC regulatory compliance A-4
features 4-1
I/O interfaces 4-12
installation 1-23
programming information E-1
regulatory compliance A-4
MVME320 disk/tape controllers D-2
MVME323 disk/tape controller D-3
MVME327A disk/tape controller D-3
MVME328 disk/tape controller D-4
MVME350 controller D-4
MVME374 network controller C-1
MVME376 network controller C-1
N
network boot process 2-11
network controller modules C-1
non-volatile RAM (NVRAM) 3-8 , 3-11
no-VMEbus-interface option 4-7 , 4-11 , 4-16
O
operating parameters 3-9
operating temperature A-1
option fields, in firmware command 3-6
P
P1 and P2 connectors 4-18 , 5-5
parameters, ENV command 3-11
Petra ASIC
control of Flash access time 4-11
IP bus Strobe* signal 2-5
MC2 function 1-13 , 2-5
MCECC function 1-21
SCSI controller support 4-15
pin assignments, connector 5-1
port number(s) 3-5
power requirements A-1
powering up the board 2-1
power-save mode 4-10
preparing the board 1-1
processor
bus structure 4-6
cache memory 4-6
location monitors 1-26