User Guide
27
When the main battery reaches a very low battery state, the combination of main battery and backup battery
retains data in memory for at least 72 hours.
To Charge Batteries
Cradles: The MC9190-NI slips into the cradles for charging the battery in the MC9190-NI (and spare batteries,
where applicable). For detailed cradle setup and charging procedures refer to the
MC9190-G Integrator Guide
.
•
Single Slot Serial/USB Cradle
•
Four Slot Ethernet Cradle
•
Four Slot Charge Only Cradle.
Accessories: The MC9190-NI snap-on accessories provide charging capability, when used with one of the
accessory charging cables. For detailed snap-on setup and charging procedures refer to the
MC9190-G
Integrator Guide
.
•
CAM
•
MSR.
Chargers: The MC9190-NI spare battery charging accessories are used to charge batteries that are removed
from the MC9190-NI. For detailed spare battery charging accessories setup and charging procedures refer to the
MC9190-G Integrator Guide
.
•
Single Slot Serial/USB Cradle
•
Four Slot Spare Battery Charger
•
Universal Battery Charger (UBC) Adapter.
NOTE
Do not remove the main battery within the first 15 hours of use. If the main battery is removed
before the backup battery is fully charged, data may be lost.
NOTE
The cradle may be used for charging and for data communication only outside the hazardous
area.
NOTE
The accessories may only be used outside the hazardous areas.
NOTE
The chargers may only be used outside the hazardous areas.
