14
MC9190-NI
Warnings for Battery
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007, EN60825-1: 2007 and IEC60825-1 (Ed. 2.0). The laser classification is marked on one of the
labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended
purpose.
ATTENTION
Equipment that is damaged in any way or that does not function properly must instantly be
removed from the hazardous area and sent in for inspection/repair!.
Take the device out of the hazardous areas before wiping it with a dry cloth or cleaning it!
General statutory regulations or directives on safety at work; accident prevention regulations
and environmental protection legislation must be complied with, e.g. Ordinance on industrial
health and safety (BetrSichV) or the national ordinances.
Ensure safe handling of the equipment during operation by making sure the device in a
steady position and the user has sufficient space to move!
When transporting the equipment in vehicles, it must be placed in appropriate compartments
or fittings so that it cans neither fall off during the drive nor be exposed to extreme vibrations.
The rules for hazardous areas (see NEC Article NFPA 70) must be observed. In particular,
appropriate clothing and footwear should be worn in view of the risk of dangerous
electrostatic charges. Do not wear rubber gloves or suchlike during operation!
CAUTION
The battery may only be charged and changed outside the hazardous area!
It must be ensured that only original batteries of the following type/s are used in safety-oriented
operation. 21-65587-03-NI with 7.4 V/2200 mAh.
The use of imitation batteries or batteries from other manufacturers will render the type of
ignition protection ineffective and there will then be a risk of fire or explosion.
Keep away from children.
The battery may explode if disposed of in fire.
DO NOT short circuit or disassemble battery.
The battery may only be used for the purposes stated in the user manual and is only suitable
for use in the MC9190-NI.
If used incorrectly, there is a risk of burning. The battery should not be disassembled over a
temperature higher than +50 °C (122 °F). If the battery is damaged, battery acid can escape
from the cells and cause corrosion. For that reason, extreme care must be taken in handling
and disposing of a damaged or leaking Li-ion battery.
Defective batteries must be disposed of immediately, whereby the battery disposal regulations
that apply to the respective region must be observed.
