User Guide
25
Figure 4
Installing the Battery
Before using the MC9190-NI, install a lithium-ion battery by sliding the battery into the MC9190-NI.
When a battery is fully inserted in a MC9190-NI for the first time, upon first power up, the device boots and
powers on automatically.
Replacing a Battery
To replace the battery:
1.
Prior to removing the battery, press the red
Power
button. On Windows Mobile 6.5 devices, the
PowerKey
Action
window appears. Tap
Safe Battery Swap
.
2.
The Indicator LED Bar lights red.
NOTE
Ensure the battery is fully inserted. Two audible clicks can be heard as the battery is fully inserted.
A partially inserted battery may result in unintentional data loss.
CAUTION
The battery may only be charged and changed outside the hazardous area.
Use only original Zebra batteries, p/n 21-65587-03-NI with 7.4 V 2200 mAh for safe operation.
The use of imitation batteries or batteries from other manufacturers will render the type of
ignition protection ineffective and there will then be a risk of fire or explosion.
ATTENTION
Suspend the MC9190-NI prior to removing the battery. Failure to properly remove the
battery may cause the MC9190-NI to cold boot and potential loss of data.
