Motorola MC909X Integrator Manual Download Page 96

Page: 96 / 322

2 - 48 MC909X Integrator Guide

USB Host Communication Setup

The mobile computer can be configured as a USB host device for use with USB client devices.

To configure the mobile computer as a USB host:

Tap

Start

Settings

System

USBConfig

icon.

Figure 2-59

USBConfig Settings Window

Tap the

USB Host Mode

radio button.

Tap

To configure the mobile computer as a USB client:

Tap

Start

Settings

System

USBConfig

icon.

Tap the

USB Client Mode

radio button.

Tap

Remove the mobile computer from the cradle or CAM.

Re-insert the mobile computer into a cradle or re-connect the CAM.

NOTE

USB Host mode is only available on Windows Mobile 5.0 devices.

NOTE

When the mobile computer is configured a a USB host, it cannot ActiveSync with a host computer.

Summary of Contents for MC909X



































































































































































































































































































































Search results

Summary of Contents for MC909X

Reviews:

Related manuals for MC909X

Brands by name

Popular brands

Motorola MC909X, Integrator Manual

Search results

Summary of Contents for MC909X

Reviews:

Related manuals for MC909X

Brands by name

Popular brands