Motorola MC909X Integrator Manual Download Page 261

Page: 261 / 322

Maintenance & Troubleshooting 10 - 9

Vehicle Cradle

Table 10-7

Troubleshooting The Vehicle Cradle

Symptom

Possible Cause

Action

Mobile computer
battery charging LED
does not light.

Cradle is not receiving
power.

Ensure the power input cable is securely connected to the
cradle’s power port.

Mobile computer’s
battery is not
recharging.

Mobile computer was
removed from the cradle
too soon.

Replace the mobile computer in the cradle.

If the mobile computer’s battery pack is fully depleted, it can
take four hours to fully recharge the battery.

Battery is faulty.

Replace the battery.

Mobile computer was not
placed correctly in the
cradle.

Remove the mobile computer from the cradle, and re-insert
correctly. If the battery still does not charge, contact Customer
Support.

The mobile computer battery charging LED blinks amber when
the mobile computer is correctly inserted and is charging.

No data was
transmitted, or
transmitted data was
incomplete.

Mobile computer was
removed from the cradle
during communication.

Replace the mobile computer in the cradle and retransmit.

The external device
required a null modem
cable, which was not
used.

Retransmit using a null modem cable.

Incorrect cable
configuration.

See the System Administrator.

Summary of Contents for MC909X



































































































































































































































































































































Search results

Summary of Contents for MC909X

Reviews:

Related manuals for MC909X

Brands by name

Popular brands

Motorola MC909X, Integrator Manual

Search results

Summary of Contents for MC909X

Reviews:

Related manuals for MC909X

Brands by name

Popular brands