Motorola MC909X, Integrator Manual

Page: 286 / 322

B - 10 MC909X Integrator Guide
You can check this option in conjunction with
Launch application
. After iDockIt establishes the network connection,
it launches the specified application.
Launch Application
Check this option to have iDockIt launch the selected application when you place the mobile computer in a modem
cradle. iDockIt uses the specified command line parameters. You must select an application to launch. If Establish
network connection is checked, the application does not launch until a connection is successfully established.
Select...
1.
Tap
Select
to open the
Select Auto-Launch Application
dialog.
2.
Select a
File Type
in the drop-down list.
3.
Select a Folder (as needed).
4.
Use the input panel to specify command line parameters.
5.
Select a file name in the list.
6.
Tap
OK
at the top of the screen.
The selected application appears in the settings tab.
Choose Connection
The
Connect using
drop-down list includes all modem connections that you have defined for the mobile computer.
Choose the one you wish to use.
If you check the General settings options to
Display settings when cradled
and
Auto-connect after x seconds
, you
have an opportunity to select the appropriate modem connection when you cradle the mobile computer.
If you do not check the above options, iDockIt uses the last modem connection you selected.
Tap
New
to create a new modem connection.
Tap
Edit
to change the settings of an existing modem connection.
Tap
Delete
to delete the currently displayed modem connection.
Create A New Modem Connection
1.
Get the following information from your ISP or network administrator: dial-up access telephone number, user
name, password, domain name, and TCP/IP settings.
2.
Tap
New
below the
Connect using
list.
3.
Enter a name for the connection.
4.
In the Modem list, tap your modem type. For the modem cradle, tap
Hayes Compatible on COM1
.
5.
Tap
Configure
and change any Port Settings in the Connection Properties dialog, depending on requirements
for your modem.
6.
Tap
Next
after entering the connection name and choosing a modem.
7.
Enter the access phone number and then tap
Next
.
8.
Enter Login information (user name, password, and domain name) and then tap
Next
.