Motorola MC909X, Integrator Manual

Page: 298 / 322

B - 22 MC909X Integrator Guide
2.
Select a
File Type
in the drop-down list.
3.
Select a
Folder
(as needed).
4.
Use the input panel to specify command line parameters.
5.
Select a file name in the list.
6.
Tap
OK
at the top of the screen.
The selected application appears in the settings tab.
Choose Connection
The
Connect using
drop-down list includes all modem connections that you have defined for the mobile computer.
Choose the one you wish to use.
If you check the General settings options to
Display settings when cradled
and
Auto-connect after x seconds
, you
have an opportunity to select the appropriate modem connection when you place the mobile computer in the
cradle.
If you do not check the above options, iDockIt uses the last modem connection you selected.
Tap
New
to create a new modem connection.
Tap
Edit
to change the settings of an existing modem connection.
Tap
Delete
to delete the currently displayed modem connection.
Create A New Modem Connection
1.
Get the following information from your ISP or network administrator: dial-up access telephone number, user
name, password, domain name, and TCP/IP settings.
2.
Tap
New
below the
Connect using
list.
3.
In the Connection Properties dialog, enter a name for the connection.
4.
In the Modem list, tap your modem type. For the modem cradle, tap
Hayes Compatible on COM1
.
5.
Tap
Configure
and change any Port Settings or Call Options in the Device Properties dialog, depending on
requirements for your modem.
6.
Tap
Next
after entering the connection name and choosing a modem.
7.
Enter the access phone number and then tap
Next
.
8.
Enter Login information (user name, password, and domain name) and then tap
Next
.
9.
You should not need to change any TCP/IP settings unless directed by your ISP or network administrator. Tap
Next
and then tap
Finish
in the next server address dialog.
The new modem connection is in the drop-down list.
Edit An Existing Modem Connection
1.
In the
Connect using
list, select the modem connection you need to modify.
2.
Tap
Edit
.