69
Appendix
APPENDIX
For Advanced Users
If you are an experienced user, refer to this section for:
• Setting HyperTerminal
• Installing packet data without the disk
• Using AT commands and S-Registers
Setting HyperTerminal
To enter AT commands, you must set HyperTerminal.
To set HyperTerminal:
1. From the taskbar on your Windows 95, Windows 98, or Windows NT
desktop, select “Start”.
2. Select “Programs”.
3. Select “Accessories”.
4. Select “HyperTerminal”.
5. Double-click “Hypertrm.exe”. The New Connection - HyperTerminal
window opens, displaying the Connection Description dialog box.
6. Enter a name for your connection. For example, if you are using
COM1, enter “Communication to COM1.”
7. Select an icon to display with the name.
8. Click “OK”. The modem Number dialog box opens, displaying the
icon that you created above.
N O T E
If, during this procedure, you cannot find the
HyperTerminal file in the Accessories folder, search for it as
follows:
1. From the taskbar on your Windows 95, Windows 98,
or Windows NT desktop, select “Start”.
2. Select “Find”.
3. Select “Files or Folders” and search for the file name
“hypertrm.exe”.
If a search does not find the file, you can install it from your
Windows 95, Windows 98, or Windows NT installation
disks. Then repeat the procedure for Setting HyperTerminal
described below.