89
Appendix
Restore Factory Defaults
Local Flow Control (Traditional)
Display Current Parameter Values
&F
This command causes the modem to reset all parameters and
S-registers to their factory-defined default values. The optional
parameter value, if present, must be 0.
Action
AT&f
Query
Range
&K
This parameter selects the type of flow control used between
the computer and the modem while in data transfer mode. This
command is supported for backwards compatibility purposes.
This command sets the method of flow control for both
directions of the computer-to-modem interface, while the +IFC
command allows for a separate setting for each direction. The
setting of this command may implicitly alter the settings of the
+IFC command.
Action
AT&k<setting>
Query
Range
Parameter Values:
0
No Flow Control (not recommended).
3
RTS/CTS Flow Control
4
XON/XOFF Flow Control
&V
This command allows the computer to view the parameter and
S-register settings for the active configuration profile.
Action
AT&v
Query
Range
