17
Installation Instructions
Installing the Software
The Installation software enables packet data service.
To install the modem wireless data software:
1. Turn on the power to your modem.
2. Turn on your computer and start Windows 95, Windows 98 or
Windows NT.
3. Insert the Installation CD-ROM in your CD-ROM drive.
4. Select “Start”, then select “Run”.
5. Type
e:\setup
(or substitute the correct drive letter).
6. Click “OK”. The Setup progress window opens. After it closes, the
Welcome window opens.
Figure 14. Installation Welcome Window
7. Click “Next”. The User Information window opens.
I M P O R T A N T
During installation, if you receive a message that you do not
have one or more of the required Windows components
installed, see “Setting Up Windows Components” on
page 10.
Take from figure 14 in Printed Book