manualshive.com logo in svg

Motorola DSP96002, User Manual

Share
Download
Motorola DSP96002 User Manual Download Page 783

 

 

 MOTOROLA INC., 1993

 

MOTOROLA

TECHNICAL DATA

 

SEMICONDUCTOR

 

May, 1993

 

MOTOROLA

 

This document contains information on a new product. Specifications and information herein are subject to change without notice.

Order this document by 
DSP96002UMAD/AD

 

FOREWORD

 

This document is an addendum to the DSP96002 IEEE Floating-Point Dual-Port Proces-
sor User’s Manual (DSP96002UM/AD). It describes significant new features added to the 
DSP96002 functionality, including an instruction cache, a new integer mode of operation 
and new parallel integer instructions to support it, data ALU register file decoupling, en-
hancements to the OnCE, and a new timer/event counter.

The revised DSP96002 is fully compatible with its predecessor. Special mode bits in var-
ious registers allow the user to access the new features.

This addendum describes each of the features in detail. Section 2 introduces the Instruc-
tion Cache. Section 3 describes the new integer mode and its associated parallel integer 
instructions. Section 4 presents presents the single precision mode. Section 5 introduces 
enhancements to the On Chip Emulation (OnCE) module. Section 6 describes the new 
timer/event counter modules, Section 7 discusses some additional changes to support 
the timer operation, and APPENDIX A gives the details of additions to the DSP96002 
instruction set.

 

1 SUMMARY OF NEW DSP96002 FEATURES

 

Instruction Cache

 

The functionality of the 1K internal Program Memory (PRAM) has been extended by al-
lowing it to operate as a 4K byte (1K word) “real-time” Instruction Cache. The term “real-
time” emphasizes the high degree of controllability available within the Instruction Cache 
permitting deterministic results. After reset the cache is disabled and the Program Mem-
ory functionality is identical to the DSP96002 described in the DSP96002 User’s Manual.

 

Addendum to

 

DSP96002 Digital Signal Processor User Manual

THE DSP96002 INSTRUCTION CACHE and
32-BIT TIMER/EVENT COUNTER

DSP96002

Summary of Contents for DSP96002


































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands