manualshive.com logo in svg

Motorola DSP96002, User Manual

Share
Download
Motorola DSP96002 User Manual Download Page 601

B-82

DSP96002 USER’S MANUAL

MOTOROLA

  lsr    d0       d0.l,d2.l 

  dec    d2       d2.l,d4.l 

  neg    d1       d0.l,r0 

  move            d2.l,m0 

  move            d1.l,n0 

  move            d1.l,d5.l 

; Draw first point 

  jsr   _draw_point 

; Draw additional points 

  do    d4.l,_line_x_yn 

  inc   d6       r0,d2.l 

  add   d5,d2    (r0)+n0 

  cmp   d4,d2 

  dec   d7       ifge 

_draw1 

  jsr   _draw_point 

_line_x_yn 

  rts 

; Draw a single point 

_draw_point 

  move           d6.l,x:(r1)+   d7.l,y: 

  rts 

 B.1.44

Wire-Frame Graphics Rendering  

         WIRE-FRAME RENDITION OF A THREE DIMENSIONAL POLYLINE 

                     ON THE MOTOROLA DSP96002  

                         Version 1.00 

OVERVIEW  

This program displays a three dimensional polyline in two dimensions.  The points of the polyline, as defined

in the input list, are  projected into two dimensions using the perspective transformation.  The projected

points are output to a display list that can be drawn  by a graphics engine or a fast drawing program.  

In order to maximize speed, two loops perform the graphics  transformations:  the trivial accept loop and the

trivial reject loop.  

The trivial accept loop assumes that the last displayed point was  inside the viewing pyramid and thus not

clipped.  It pulls a new  point from the input list, converts it to clipping space and checks  if it is inside the

viewing pyramid.  If so, the routine performs  the perspective transformation, scales and translates the point

so  it lies within the viewing window, and finally adds it to the  display list.  

Summary of Contents for DSP96002


































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands