Motorola DSP96002 User Manual Download Page 777

Page: 777 / 897

MOTOROLA

DSP96002 USER’S MANUAL

D-25

Figure D-12. The Multiply Unit

32 Bits

64 Bits

32 Bits

Multiplier Array

Round

Rounding mode is determined

by rounding bits in the MR.

this exponent for normalization of the result, after which the exponent (biased) is stored in the high portion

of the destination register. This is depicted in Figure D-16.

For example, if the mantissa of the first operand in a floating point addition is 1.010...0, with biased exponent

of 10, and the mantissa of the second operand is 1.000...0000, with biased exponent of 13, the exponent

comparator simply delivers the difference (=3) to the barrel shifter, the first operand’s mantissa is aligned to

0.001010...0, the two mantissas are added to deliver 1.001010...0, and the result (biased) exponent equals

13. The postnormalization unit does not need to postnormalize the result in this case.

If the first operand’s mantissa is 1.010...0 with biased exponent of 13 and the second operand’s mantissa

is 1.000...0 with biased exponent of 13, the exponent difference is zero and the barrel shifter does not need

to realign the mantissas. The result after addition is now equal to 10.010...0, which needs to be postnormal-

ized by adding one to the result exponent. The exponent update unit sets the result exponent (biased) equal

to 14 and the result mantissa is 1.0010...0.

Finally, if the first operand’s mantissa in a floating point subtraction is 1.010...0 with biased exponent of 10,

and the second operand’s mantissa is 1.00...0 with a biased exponent of 10, the result mantissa after sub-

traction is -0.010...0. This is not normalized, and the postnormalization unit subtracts two from the exponent.

The result mantissa is -1.000...0 with a biased exponent equal to 8.

D.1.5.4

Special Function Unit

The special function unit consists of a logic unit and a divide and square root unit. The logic unit is further

described under the fixed point (integer) operations.

The divide and square root unit supports execution of the divide and square root algorithms. These algo-

rithms are iterative, and require an initial approximation or "seed". The FSEEDD and FSEEDR instructions

Summary of Contents for DSP96002


































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DSP96002

Reviews:

Brands by name

Popular brands

Motorola DSP96002, User Manual

Search results

Summary of Contents for DSP96002

Reviews:

Brands by name

Popular brands