Motorola Canopy 150 Mbps Backhaul, User Manual

Page: 3 / 174

2
Issue 1.1 April 2006 Page
The system has basically been shown to comply with the limits for emitted spurious radiation for a
Class B digital device
1
FP
pursuant to Part 15 of the FCC Rules in the USA as well as comparable
regulations in other countries. These limits have been designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the Outdoor Unit (ODU).
•
Increase the separation between the equipment and ODU.
•
Connect the equipment into a power outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Deployment and Operation
The Radio Regulations of various countries constrain the operation of radio products generally. In
particular, at 5.8GHz, the local regulator may limit the amount of conducted or radiated transmitter
power; the frequency band used and may require registration of the radio link.
The power transmitted by the 150/300 Mbps Backhaul product is controlled by the use of Region-
specific License Keys.
The following examples show how the regulatory limits apply in some specific countries at the current
time. Operators should note that regulations are subject to change.
Contact your supplier/installer to ensure that the product has achieved Type Approval and is set to
the correct license key for your country/region and to ensure that you have fulfilled all local regulatory
requirements, especially if you are intending to use a link with external antennas. Footnotes to the
table below indicate countries where registration of the link is currently mandatory.
TP
1
PT
Class B Digital Device, A digital device that is marketed for use in a residential environment notwithstanding use in
commercial, business and industrial environments.