Motorola 2.1, Networking Setup Manual

Page: 31 / 135

Chapter 2: Network Setup
14
When the
Network Configuration
screen is displayed, click on the
Edit
button. Uncheck
Configure using DHCP
. Input the following;
IP Address
: 172.31.0.20
Netmask
: 255.255.0.0
Click on the
OK
button.
15
Input the remaining network data.
Host Name
: WMS
Gateway
: 172.31.0.2
Primary DNS
: 172.31.0.20
Click on the
Next
button.
16
It is suggested that you select the
No Firewall
option when the
Firewall Configuration
screen
is displayed. Click on the
Next
button.
Selecting another option may impact the function of network services, including
WMS.
On the same page, make sure SE Linux is set to disable.
17
When the
Additional Language Support
screen is displayed, select any additional language
options required. Click on the
Next
button.
18
When the
Time Zone Selection
screen is displayed, select the appropriate settings for your
geographic location. Click on the
Next
button.
19
When the
Set Root Password
screen is displayed, input your root password. The reference
design default is
g0ld11
. Input and confirm the password. Click on the
Next
button.
20
At the
Package Installation Defaults
screen, select Customize the set of packages to be
installed . Click on the
Next
button.
21
You may now choose the packages to be installed. In addition to the defaults, you
must
choose the following to satisfy prerequisites for the One Point Wireless Manager™ application:
- KDE Desktop Environment (To Make KDE your default Desktop Environment unselect
"GNOME Desktop Environment" package, or it will be automatically selected)
- Editors
- Graphical interface – Only Firefox
- DNS Name Server
- Network Servers
You may choose any desired packages as well as a preferred window manager at this time.
Click on the
Next
button when you are satisfied with the package selection.
22
The installer is now ready to copy files to the server. Click on the
Next
button to continue. The
installer will format and copy files to the hard drive. This process will take several minutes. You
will be prompted for additional discs.
23
When the
Congratulations
screen is displayed, the Red Hat Enterprise Linux ES installation is
complete. Remove any install media and click on the
Reboot
button.
2-17