Motorola 2.1, Networking Setup Manual

Page: 103 / 135

Appendix A:
5
configure terminal
Enter global configuration mode.
6
interface vlan 1
[ interface-id ]
Enter interface configuration mode, and specify the interface to
configure.
(In this case vlan 1)
7
ip directed-broadcast
Enable directed broadcast-to-physical broadcast translation on the
interface.
Note:
The
ip directed-broadcast
interface configuration command
can be configured on a VPN routing/forwarding (VRF) interface and is
VRF-aware. Directed broadcast traffic is routed only within the VRF.
8
exit
Return to global configuration mode.
9
ip forward-protocol udp
snmp
Specify which protocols and ports the router forwards when forwarding
broadcast packets.
10
end
Return to privileged EXEC mode.
11
show ip interface
[ interface-id ]
or
show running-config
Verify the configuration on the interface or all interfaces
(in this case
vlan 1) .
12
copy running-config
startup-config
(Optional) Save your entries in the configuration file.
Documentation Credits: Some source information for this procedure was extracted from the Cisco
Catalyst 3750 Software Configuration Guide.
Cisco 3750 L3 Switch Core Configuration File
The contents of the Cisco 3750 standard production file are shown.
Using 4445 out of 524288 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname L3-CORE
!
enable secret 5 $1$Ug./$VMDwCPRbtHyUcMsOq.6u90
9-2