Motorola 2.1, Networking Setup Manual

Page: 37 / 135

Chapter 2: Network Setup
7
Once formatting is complete, the system will copy the installation files to the drive. Upon
completion, the system will reboot. On reboot, do not press a key to boot from CD; just allow
the system to boot into the Windows 2003 Server Setup to continue with the installation.
8
After a period of time, the Regional and Language Options dialog will appear. The default
selection of
English (United States)
is correct. Select
Next
.
9
Enter a
Name
and
Organization
, then select
Next
.
10
Depending on the media used for install, the Product Identification screen may appear. If it
does, enter the 25-digit key and select
Next
.
11
Select
per Server
for licensing mode unless there is a specific requirement for different
licensing according to the deployment. Select
Next
.
12
Enter a
Computer Name
:
radius
, and enter an administrator password
G0ld11
(Windows
2003 Server requires you to use a capital letter in the administrator password).
Select
Next
and then select
Yes
at the dialog box to accept the password as is.
13
Set the correct Date and Time, and Time Zone. Select
Next
; the installation will continue.
14
After a period of time this system will reboot. Again, avoid pressing a key to boot from the CD.
The system will boot to the login prompt. Login as administrator using the password previously
defined.
15
Adjust any necessary settings, such as display size, etc, as needed.
16
Open
Control Panel | System
and select the
Computer Name
tab. Next select the
Change
option and then the
More
button. Set the primary DNS suffix to
meshnetworks.net
. Upon
confirmation, the system will request a re-start. Select
Yes
.
17
When the reboot is done, the base Windows 2003 Server Installation is complete.
Driver Installation for HP DL360 G5 Server
Windows 2003 server does not recognize the HP GL360 G5’s Ethernet adapter by default
and drivers must be loaded. The server comes with a driver CD which can also be obtained
online at HP’s website.
Procedure 2-4 Ethernet Driver Installation for the HP DL360 G5 Server
1
Insert the HP Smart Start CD.
2
The License and Smart Start GUI will display. Accept the license.
3
Select
Start
menu.
4
Right mouse button, click on
My Computer
and select
Properties
popup menu option.
5
Select
Hardware
tab.
6
Select
Device Manager
button.
7
Select the
Other
devices group.
8
Right-click on one of the two
Ethernet Controllers
and select
Update Driver
.
2-23