model no. 140-0050-6 | contact us 1-888-942-6686
12
aSS
embl
y
4
Turn winch right side up. Disengage the
clutch by moving the clutch to the “Out”
position — the arrow will be to the back of
the winch as shown. Release the synthetic
rope and pull through the aluminum hawse.
CAUTION!
See Key parts list section for torque ratings. mounting bolts must be Sae grade 5 or better and torqued to
34 lbf-ft (46 nm).
CAUTION!
if utilizing a mounting plate, ensure that the three major sections (motor, drum and gear housing) are
properly aligned. proper alignment of the winch will allow for even distribution of the full rated load.
the type of vehicle to which the winch and mounting channel will be applied, will dictate the type of
mounting kit that should be used.
5
Attach the clevis hook to the synthetic rope
by removing cotter pin and pin, then thread
through and reattach the pin and cotter pin.
clutcH
out
