9
Key
par
tS
d
iagram
7.
Hand Strap
– Used to assist synthetic rope
feed.
8.
Aluminum Hawse
– When using the winch
at an angle the hawse acts to guide the
synthetic rope onto the drum and minimizes
damage to the synthetic rope from abrasion
on the winch mount or bumper.
9.
Mini-rocker Switch
– Rocker switch with
handlebar mount for powering the synthetic
rope in or out of your winch drum.
10.
Solenoid/Contactor
– Power from the
vehicle battery flows through the weather
sealed contactor before being directed to the
winch motor.
11.
Mounting Channel
– Winch mount to attach
the winch to your vehicle.
12.
Winch Connection Cables
– Used to
connect the contactor to the winch motor and
the contactor to the vehicle battery.
8
9
10
11
12
13
15
14
16
7
13.
Synthetic Rope
– 38' x 15/64"
(11.6 m x 6 mm) Synthetic rope designed
specifically for load capacity of 4,700 lb
(2,132 kg). The synthetic rope feeds onto the
drum in the “under wind” position through
the aluminum hawse and is looped at the
end to accept the clevis hook pin.
14.
Clevis Hook
– Provides a means for
connecting the looped ends of cables to an
anchor.
15.
Wire Tap
– Allows the ability to splice the
end of the red wire on the mini-rocker switch
to an ignition or keyed controlled power
source.
16.
Cable Ties
– Attaches the mini-rocker
switch cable to the chassis of your vehicle.