model no. 140-0050-6 | contact us 1-888-942-6686
24
m
aintenance
MAINTENANCE
The owner/operator is responsible for all periodic maintenance.
Complete all scheduled maintenance in a timely manner. Correct any issue before operating the winch.
BEFORE FIRST OPERATION
Take time to fully read winching techniques in order to understand your winch and operations.
Check fasteners and make sure they are tight and to proper torque. Replace damaged fasteners.
Verify wiring to all components is correct and be certain that all connections are tight.
Verify there is no exposed/bare wiring, terminals or cable insulation damage. Cover any terminals with terminal boots.
Repair or replace damaged electrical cable.
Inspect winch cable/rope, hook, and other parts. Frayed, kinked or damage cable/rope must be replaced immediately.
AFTER EACH USE
Inspect winch cable/rope, hook, and other parts. Frayed, kinked or damage cable/rope must be replaced immediately.
Periodically rinse the synthetic cable/rope with water to remove any sand, dirt, mud, or debris that can build up and
become embedded in the cable/rope during use.
Keep winch cable/rope and controls free from contaminants. Use a clean rag to remove any dirt or debris.
If winch is submerged in water, power winch cable/rope out and back to about 30’ (9 m) to dry out the winch cable/
rope properly.
EVERY 90 DAYS
Check fasteners and make sure they are tight and to proper torque. Replace damaged fasteners.
Verify wiring to all components is correct and be certain that all connections are tight.
Verify there is no exposed/bare wiring, terminals or cable insulation damage. Cover any terminals with terminal
boots. Repair or replace damage electrical cable.
Inspect winch cable/rope, hook, and other parts. Frayed, kinked or damage cable/ropes must be replaced
immediately.
WARNING!
never operate a damaged or defective winch.
improper maintenance will void your warranty.
