Motomaster ELIMINATOR 140-0050-6 Instruction Manual Download Page 6 | Manualshive

Page: 6 / 37

background image

model no. 140-0050-6 | contact us 1-888-942-6686

6

impor

tant Safety

in

Struction

S

WARNING!

• always use extreme caution when handling hook and cable/rope during spooling operations.
• always use supplied hand strap whenever spooling rope in or out, during installation and during operation.

WARNING!

always wear heavy leather gloves when handling cable/rope.

CAUTION!

do not wrap the cable/rope around any object and hook it back onto itself.

CAUTION!

duration of winching pulls should be kept as short as possible.
if the motor becomes excessively hot to the touch, stop winching immediately and let it cool down for 5
minutes. do not pull for more than one minute at or near the rated load.

CAUTION!

if the motor stalls, do not maintain power to the winch.
electric winches are designed and made for intermittent use and should not be used in constant duty
applications.

«
...
4
5
6
7
8
...
»

Summary of Contents for ELIMINATOR 140-0050-6






































Reviews:

No comments

Related manuals for ELIMINATOR 140-0050-6

Brand: Nabrico Pages: 72

Brand: KFI Pages: 24

Brand: SuperATV Pages: 16

Brand: Hamron Pages: 32

Performa Winch 35.2 STP

Brand: Harken Pages: 16

Brand: IKH Pages: 25

Brand: Harken Pages: 32

Brand: Harken Pages: 2

Brand: AWD Pages: 54

Brand: DX Engineering Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands