9.2 Notes on Maintenance Procedures
9-15
HW0482170
HW0482170
5. Remove the grease zerk A-MT6 x 1 from the grease inlet 1, and reinstall the screw M6.
Apply the Three Bond 1206C on the screwed part of the screw.
6. Remove the hexagon socket head cap screw M6 from the grease inlet 2.
7. Install a grease zerk A-MT6 x 1 to the grease inlet 2. (The grease zerk is delivered with
the manipulator.)
8. Inject grease into the grease inlet 2 using a grease gun.
9. Remove the grease zerk A-MT6 x 1 from the grease inlet 2, and reinstall the screw M6
into the grease inlet 2. Apply the Three Bond 1206C on the screwed part of the screw.
10. Reinstall the plug M6 to the exhaust port. Apply the Three Bond 1206C on the
screwed part of the plug.
The exhaust port is used only for air flow.
Do not inject excessive grease into the grease inlet.
Grease type: Alvania EP grease2
Amount of grease: 5cc
The exhaust port is used only for air flow.
Do not inject excessive grease into the grease inlet.
NOTE
NOTE
