Motion Concepts F Series Owner'S Manual Download Page 7 | Manualshive

Page: 7 / 60

background image

- 7 -

1.1

Important Symbols in this Manual

Operating your Motion Concepts Seating System safely depends upon your diligence in following the
warnings, cautions and information provided in this User Manual. Setting up and operating the system safely
also depends on your own good judgement and common sense, as well as that of your provider, caregiver
and/or health professional.

The safety symbols below are used throughout this manual to identify warnings, cautions and important
notes. It is very important for you to read and understand them completely.

WARNING!
This symbol warns you of danger!

• Always follow these instructions to avoid injury to the user or damage to the product!

EXPLOSION HAZARD!
This symbol warns you of an explosion hazard (e.g.; excessive tire pressure in a pneumatic
tire!)

• Always follow the instructions to avoid injury to the user or damage to the product!

BURN HAZARD!
This symbol warns you of potential burns (e.g.; leaking battery acid!)

• Always follow the instructions to avoid injury to the user or damage to the product!

IMPORTANT!

• Important information to remember when operating your Motion Concepts power positioning system

NOTE:

• This symbol identifies general information which is intended to simplify working with your product
and/or which refers to special functions or important instructions.

Requirements:

• This symbol identifies a list of various tools, components and items which you will need in order to
carry out certain work.

READ WELL BEFORE OPERATION!

• This symbol advises you to read information carefully.

Safety Symbols:

PLEASE NOTE:

This User Manual and other reference documents are available in PDF-

format. The Adobe Reader program offers user-friendly tools (e.g. zoom in/ magnification
tool) to assist individuals with reading difficulties. If an image or drawing size cannot be
increased, please contact Motion Concepts and high-resolution documents will be provided

.

«
...
5
6
7
8
9
...
»

Summary of Contents for F Series





























































Reviews:

No comments

Related manuals for F Series

Brand: Latchways Pages: 80

Brand: Kapriol Pages: 28

Brand: GE Pages: 14

Brand: GE Pages: 11

Brand: GE Pages: 20

Druck ADTS 2 Series

Brand: GE Pages: 18

Brand: York Fitness Pages: 34

Brand: NEC Pages: 54

Brand: Bacharach Pages: 48

Brand: Danfoss Pages: 106

Brand: Gainsborough Pages: 2

Brand: Gainsborough Pages: 2

Brand: Gait up Pages: 12

Brand: Gait up Pages: 6

Brand: Gaiam Pages: 2

Brand: Jaga Pages: 32

Brand: R&S Pages: 2677

Brand: Balanced Body Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands