manualshive.com logo in svg

Motion Concepts F Series, Owner'S Manual

Share
Download
Motion Concepts F Series Owner'S Manual Download Page 16

- 16 -

2.8   Motor Vehicle Transportation

WARNING!  

WARNING!  This wheelchair seating system in combination with the wheelchair base has
NOT been crash tested and may NOT be used as a vehicle seat!

•    Your Motion Concepts Power Positioning System (in combination with the OEM wheelchair
power base) has not been tested to the requirements of ISO 7176-19:2001 or ANSI/RESNA WC-19
and may not under any circumstances be used as a vehicle seat or to transport the user in a vehicle.
•   Using a wheelchair that does not fulfill these criteria as a vehicle seat can lead to the most
severe injuries and even death in the event of a traffic accident.

2.0

2.0

SAFETY INFORMATION

SAFETY INFORMATION

WARNING! Danger of fire or breaking down due to electric devices being connected!

• Do not connect any electric devices to your mobility device that are not expressly certified Motion
Concepts for this purpose. Have all electrical installations performed by an authorised Motion Concepts
Dealer.

2.7   OEM Wiring Harnesses and Electronics

The cables and harnesses on your Motion Concepts power positioning system are designed and tested to
meet all necessary safety standards.

WARNING!  The wiring harnesses/cables are not to be modified in any way following the
installation of our Motion Concepts power positioning system.

• If installed on previously used product, the existing OEM harnesses on the wheelchair should be
examined for damage/ wear and replaced if necessary. Please consult the wheelchair base manufacturer
if you are unsure as to the status or condition of the existing wiring harness before interfacing with
our Motion Concepts seating system.

2.6   Hardware

W

ARNING! Do not substitute hardware

• All hardware used by Motion Concepts in the assembly and installation of our Power Positioning
Systems is high strength. Use only the hardware supplied with the seating system.

Should you require any replacement hardware for your seating system, please contact our Customer Service
Department, or your local authorized Motion Concepts Dealer for assistance.

WARNING! Always exercise caution near open flames and cigarettes.

2.5   Flammability 

The materials (foam and fabrics) utilized in our Motion Concepts power positioning systems are tested to ensure
compliance with North American Flammability Standards (California Technical Bulletin, CA TB 117)

WHEELCHAIR TRANSPORTATION WARNINGS!

Summary of Contents for F Series





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands