Motion Concepts F Series, Owner'S Manual

Page: 26 / 60

- 26 -
4.0
4.0
ELECTRONICS
ELECTRONICS
Seating systems that are configured with a power elevating seat (PES) or scissor lift module may be
configured/programmed with either an
Elevate Drive Lockout or a Reduced Drive Speed limit . Both
limits utilize a microswitch to trigger the seating system into drive lockout or reduced speed drive as soon
as the seating system is elevated to a pre-determined height beyond the home (fully retracted) position.
Tilt/Recline/Elevate (T/R/E) systems: Elevate Drive Lockout = Max.
1/2”
Elevate-Only systems: Elevate Drive Lockout = Max.
2”
Tilt/Recline/Elevate & Elevate-Only systems: Reduced Speed Drive = Max.
1/2”
4.3.2 Elevate Drive Lockout (DLO) or Elevate Reduced Drive Speed Limit
home
position
Front
Important! Ensure base is on a level surface when adjusting settings
1/2”
elevated
T/R/E Drive Lockout
Reduce Speed Drive
2”
elevated
Elevate-Only DLO
NOTE: To regain full drive function of the wheelchair, return the seat angle to a more upright position
(when Tilt/Recline DLO is activated), or lower the seat to its home position (when Elevate DLO/ Elevate
Reduced Drive is activated).
WARNING! Risk of compromised wheelchair stability and serious personal injury.
• Always ensure the wheelchair is on a smooth level surface when driving in an elevated position
(even at reduced speed).
•
Never drive up or down an incline while elevated.
• Never reach for items/objects, or shift body position (in any direction) while in an elevated position.
• Never transfer in or out of your wheelchair while elevated.