- 51 -
6.0 SYSTEM INSTALLATION/ SET-UP/ ADJUSTMENT REVIEW
6.0 SYSTEM INSTALLATION/ SET-UP/ ADJUSTMENT REVIEW
1.
Check all fasteners/mounting hardware to ensure that they have been properly tightened.
2.
Check the drive lockout limit is funcitoning.
3.
Check the reduced speed drive (if applicable)
4.
Check the tilt (tilt/recline) limit (if applicable).
5.
Check the full range of tilt and recline and elevate (as applicable). Make certain that there
is no interference. Make sure that the wheelchair is stable with the client in it over the entire
range.
6.
Check power legrest function (if applicable). Ensure there is appropriate ground clearance
in the retracted position, and check for interference over the full range of travel.
7.
Check all wires and cables over the complete tilt/recline/elevate range for pulling, crushing
or tight bends.
8
Check that the charger functions properly.
9.
Check that the acceleration and deceleration of the wheelchair have been programmed
to levels appropriate for the user.
10.
Check all of the wheelchair drive functions.
11.
Check that the rod-ends on the tilt and recline actuators have been properly pinned (if applic).
12.
Check the anti-tipper latching system (if applicable).
13.
Check that the anti-tipper extensions are installed (if required).
14. If
the front or rear anti-tippers are adjustable, check that they have been set to the appropriate
postition for the user.
15.
Test drive the wheelchair and operate the power positioning system.
16.
Ensure the Owner’s Manual is provided to the end user.
IMPORTANT!
Following any installation, set-up and/or adjustment related to the power positioning
system always test the system over its full range of positioning functions to ensure all motors, safety
limits are functioning correctly. Verify that all mounting hardware and critical components are also
installed/adjusted properly.
The following checklist is provided as a reference when conducting a final review/ inspection of the wheelchair.
6.1 System Review Checklist
If you have any concerns or questions regarding your Motion Concepts Power Positioning
System please contact our Techncal Service Department for assistance.
USA:
888-433-6818
CAN:
800-680-4191
Summary of Contents for F Series
Page 2: ......
