68
Maintenance and Service
•
Déconnectez toutes les sources d’alimentation du contrôleur avant d’installer ou de régler
le TS-MPPT-600V-TR.
•
Le TS-MPPT-600V-TR ne contient aucun fusible ou interrupteur. Ne tentez pas de réparer.
Installation Safety Precautions
WARNING:
This unit is not provided with a GFDI device. This charge controller must be used with an
external GFDI device as required by the Article 690 of the National Electrical Code for
the installation location.
•
Mount the TS-MPPT-600V-TR indoors. Prevent exposure to the elements and do not allow
water to enter the controller.
•
Install the TS-MPPT-600V-TR in a location that prevents casual contact. The
TS-MPPT-600V-TR heatsink can become very hot during operation.
•
Use insulated tools when working with batteries.
•
Avoid wearing jewelry during installation.
•
The battery bank must be comprised of batteries of same type, make, and age.
•
Do not smoke in the vicinity of the battery bank.
•
Power connections must remain tight to avoid excessive heating from a loose connection.
•
Use properly sized conductors and circuit interrupters.
• The grounding terminal is located in the wiring compartment and is identified by the
symbol below.
Ground Symbol
•
This charge controller is to be connected to DC circuits only. These DC connections are
identified by the symbol below.
Direct Current Symbol
The TS-MPPT-600V-TR controller must be installed by a qualified technician in accordance with
electrical regulations of the country where the product is installed.
