19
TriStar MPPT-600V-TR Operator's Manual
3.3 Conduit Knock-Outs and Wire Routing
Knock-outs are provided for routing cables through conduit or wire glands. Table 3-1 details the
knockout sizes and quantity provided on the TS-MPPT-600V-TR wiring box. Knockout placement
dimensions are on the inside front cover. Figures 3-2 and 3-3 show knock-out types.
The TS-MPPT-600V-TR wiring box provides continuous and separate paths for high
voltage (solar) and low voltage (battery & COM) wiring routing. These allow wiring to pass be-
tween TS-MPPT-600V-TR controllers that are mounted side-by-side without the need for exter-
nal conduit tubing. Table 3-1 identifies the pass-through knock-outs which may be used for this
purpose. Figure 3-6 shows the routing of the high voltage and low voltage wiring paths.
3
8
7
10
4
9
2
2
6
5
5
1
1
1
3
6
11
Figure 3-2. Knock-outs, left , right and back views
