Moore 535 PROFILER, User Manual

Page: 67 / 151

Controller Set Up
58
Chapter 5 535-PROF User's Manual
Access Set Up Return to Operation Next menu Next parameter Next value Access Tuning Return to Operation
+
FAST MENU
DISPLAY
+
FAST MENU MENU
▲ ▼
MENU
DISPLAY
4. SHED TIME
Defines the time interval between communications activity before the controller
determines that communications is lost (“sheds”).
R 1 to 512 seconds
D OFF
5. SHED MODE
Defines the state of the controller if communications is lost (“sheds”).
D LAST MODE Remain in automatic or manual control (last mode before
losing communications)
• MANUAL Trip to manual control
• AUTOMATIC Trip to automatic control
6. SHED OUT.
Defines the output if the unit sheds and trips to manual control. Choose values
based on the process.
Standard Control On/Off Control Velocity Prop Control
• –5 to 105% • ON • CW
D LAST OUT D OFF • CCW
D OUTS. OFF
7. SHED SP
This defines the setpoint status if communications is lost.
D LAST SP Continues to use setpoint that was active prior
to losing communications
• DESIG. SP Goes to a designated setpoint value if
communications is lost.
8. DESIG. SP
Defines the value of the designated setpoint if communications is lost.
R Any value in the process variable range
D Dependent on the process variable range
RECIPE #
(# = 1 to 20) For each recipe number (as determined by the RECIPES parameter
in the REC. CONF. menu), you will set values for the following parameters:
1. CYCLES
Defines the number of times the recipe will run before ending or going to the
next linked recipe.
• CONTINUAL
R 1 to 99
D 1
SHED SP
LAST SP
DESIG. SP
(D)
SHED OUT.
(D)
RECIPE #
CYCLES
CONTINUAL
SHED TIME
OFF
SHED MODE
LAST MODE