535-PROF User's Manual
Chapter 5
27
Controller Set Up
Figure 5.1
Menu Flowchart for Set Up
CAUTION!
All software changes occur in real
time; always perform set up functions
under manual operation.
CHAPTER 5
SOFTWARE CONFIGURATION
The software configuration menus of the 535-PROF contain user-selected vari-
ables that define the action of the controller. Read through this section before
making any parameter adjustments to the controller.
MENUS
In Set Up mode, there are 13 sets of options that control different aspects of 535-
PROF operation; in Tuning mode, there is one. Each set of options is a menu. When
traversing the two modes, the menu names appear in the 2nd display.
CONFIG
Mode selection and input/output hardware assignments
REC. CONF.
General recipe options
PV1 INPUT
1st process variable input options
PV2 INPUT
2nd process variable input options
CUST. LINR.
Linearization curve options for PV1 input.
CONTROL
Control algorithm options
ALARMS
Alarm options
REM. SETPT.
Controller remote setpoint options
RETRANS.
Retransmission output options
SELF TUNE
Self tune algorithm options
SPECIAL
Special feature options
SECURITY
Security functions
SER.COMM.
Serial Communications options (requires comm. board)
RECIPE #
Individual recipe configuration
TUNING
Tuning parameters configuration (see Chapter 6)
NOTE:
For information about the
Tuning menu/mode, refer to Chapter
6. For more information about set up
parameters and 535-PROF
applications, refer to Chapter 7.
When initially setting up the
controller, cycle through all the
parameters in each Menu.
Press the
MENU+FAST
to
advance to the next Menu.
Press
MENU
to advance to the
next parameter (this also sets
the value for the current
parameter. Use arrow keys
to select a value).
Use the arrow keys to enter
numerical values, and/or move
through the selection group.
This is a
Menu
.
Its name will show in the 2nd display.
This is a menu
Parameter
.
The name shows in the 3rd display.
In this manual, independent parameters
appear as white text on black, and
dependent parameters appear as black
text on white.
This is a parameter
Value
.
These values appear in the 3rd display,
replacing the parameter name.
In this manual,
parameter graphics
indicate the default (factory) setting.
If the default value is dependent on other
variables, (
D
) is shown.
A range of values is indicated by (
R
).
INDICATOR
(D)
press:
MENU/FAST
CONFIG.
press:
MENU
press:
press
MENU/FAST
Go to next Menu Block
➤
➤
➤
➤
➤
➤