15
Installation
XG0228 - 021419
Figure 8.
7RS9HQW9HQWLQJ*UDSKIRUZDOOPRXQWHGWHUPLQDWLRQV
Figure 8.b
7RS9HQWHGZDOOPRXQWHGLQVWDOODWLRQZLWKHOERZRQHrEHQG7KHYHQWUXQ
PXVWFRPSO\ZLWK9HQWLQJ*UDSKIRU7RSYHQWZDOOPRXQWHGWHUPLQDWLRQV
Figure 8.c
7RS9HQWHGZDOOPRXQWHG0XOWLHOERZLQVWDOODWLRQ6HH9HQWLQJ*UDSKIRU7RSYHQW
ZDOOPRXQWHGWHUPLQDWLRQV
Figure 8.d
7RS9HQWHGZDOOPRXQWHG5HWUDFWHG0XOWLHOERZLQVWDOODWLRQ
Selection of components and details of venting layout should adhere
to the following guidelines:
ȏ
Vent terminations must not be recessed in walls or siding.
ȏ
For Heat Shield requirements see Section 3-3.
ȏ
Once the proposed venting layout has been determined refer to
graph to ensure the layout is acceptable.
Notes Wall Mounted Terminations: TOP VENT
ȏ
All measurements for vertical or horizontal runs are measured from
center of the vent pipe.
ȏ
Venting runs must fall within the limits set by the venting graph.
+7RS9HQWLQJ*UDSK
0HDVXUHWKHYHUWLFDOKHLJKWIURPWKHȴUHSODFHKHDUWKWRWKHFHQWUHRI
WKHWHUPLQDWLRQDQGWKHKRUL]RQWDOUXQIURPWKHȴUHSODFHȵXHFROODUWR
WKHZDOOȵDQJHRIWKHWHUPLQDWLRQ3ORWRQWKH9HQWLQJ*UDSKZLWKDQ;
If the 'X' falls on or above the top boundary of the shaded area, the
installation is acceptable.
+7239(17581
([DPSOH$$FFHSWDEOHΖQVWDOODWLRQ
If the vertical dimension from the hearth is 114" and the horizontal
UXQWRWKHZDOOȵDQJHRIWKHYHQWWHUPLQDWLRQLVWKLVZRXOGEHDQ
acceptable installation.
([DPSOH%8QDFFHSWDEOHΖQVWDOODWLRQ
If the vertical dimension from the hearth is 36" and the horizontal run
WRWKHZDOOȵDQJHRIWKHYHQWWHUPLQDWLRQLVWKLVZRXOGQRWEHDQ
acceptable installation.
([DPSOH&8QDFFHSWDEOHΖQVWDOODWLRQ
ΖIWKHYHUWLFDOGLPHQVLRQIURPWKHȵRRURIWKHȴUHSODFHLVDQGWKH
KRUL]RQWDOUXQWRWKHZDOOȵDQJHRIWKHYHQWWHUPLQDWLRQLVWKLV
would not be an acceptable installation.
0
HEARTH
12
12
0
60
36
120
72
96
132
Vertical Height (In.)
Horizontal Run (In.)
36
60
132
156
72
96
120
$FFHSWDEOHYHQWUXQ
within non-shaded area.
8QDFFHSWDEOHYHQWUXQ
within shaded area.
A
B
C
Exterior
Wall
Exterior
Wall
Exterior
Wall
Hearth
Termination
Heat Shield
45''
Min.
92''
Min.
92''
Min.
Rigid
Section
Rigid
Section
Flex
Section
Flex
Section
Max.
as per
graph
150"
Max.
126" Max.
30" Max.
Termination
Termination
Heat Shield
Heat Shield
