Operation
XG0228 - 021419
%DWWHU\RSHUDWHGGHYLFH
Read the battery instructions before
installing them into the system. Do not expose any battery, or its
holder, or a device in which batteries are installed, to a working
WHPSHUDWXUHJUHDWHUWKDQr&r)
WARNING
Room Thermostat (Remote Control
Operation)
The Remote Control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control
the comfort level in a room. To activate the function, press
WKH7KHUPRVWDW.H\VHH)LJXUHL7KH/&'GLVSOD\RQWKH
remote control will change to show that the room thermostat
is "On" and the set temperature is now displayed. To adjust the
set temperature press the Up or Down Arrow Keys until the
desired set temperature is displayed on the LCD screen of the
Transmitter.
Smart Thermostat (Remote Control
Operation)
The Smart Thermostat function adjusts the flame height in
accordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature
gets closer to the set point the Smart Function will modulate the
flame down. To activate the function, press the Thermostat Key,
VHH)LJXUHMXQWLOWKHZRUG60$57DSSHDUVWRWKHULJKWRI
WKHWHPSHUDWXUHEXOEJUDSKLFVHH)LJXUHM
NOTE: When smart Thermostat is activated, manual flame height
adjustment is disabled.
Figure 27.i
6HWWLQJ5RRP7KHUPRVWDW
Figure 27.j
6PDUWȵDPHIXQFWLRQ
Room Temperature
Set Temperature
'LVDEOLQJ7KHUPRVWDW
Some jurisdictions and bedroom installations require the
thermostat to be disabled.
1. Partially take out one battery.
2. Insert the battery while holding down the thermostat button.
The remote screen will display 'Clr' while the button is held
down.
3. To enable thermostat repeat steps 1-2. The remote screen will
display 'set' while the thermostat button is held down.
Fan Speed Control
The fireplace is equipped with optional hot air circulating fans.
The speed of the fans can be controlled by the Proflame system.
The fan speed can be adjusted through six (6) speeds. To activate
WKLVIXQFWLRQXVHWKH0RGH.H\VHH)LJXUHWRLQGH[WRWKHIDQ
FRQWUROLFRQVHH)LJXUHP8VHWKH8S'RZQ$UURZ.H\VWR
turn on, off, or adjust the fan speed. A single "beep" will confirm
reception of the command.
Figure 27.m
)DQ6SHHG&RQWURO