Perform the following steps to install the camera into the waterproof
case:
1.
While holding the latch lock to the
right, lift the front portion of the case
latch.
2.
Lift the rear portion of the latch to
disengage the rear door.
3.
Swing the rear door open to reveal the empty camera
housing.
4.
Carefully inspect the seal on the rear
door for damage or the presence of
sand, hair, or other foreign material.
Do not use the waterproof case
under water if there is damage to the
seal or if foreign material is present.
5.
Insert the camera into the housing lens first.
6.
Swing the rear door closed.
7.
Place the rear portion of the latch
over the catch at the top of the rear
door.
8.
Press down on the front portion of
the latch until it locks into place.
The camera is now ready for use under water!
77
Summary of Contents for MHD Sport 2.0 Wi-Fi 12570
Page 1: ......
