Monoprice MHD Sport 2.0 Wi-Fi 12570 User Manual Download

Page: 40 / 88

Changing the Time Lapse Settings

You can change the type of capture and the interval between
captures in

Time Lapse

mode by performing the following steps:

Power the camera ON.

Press the

Power/Mode

button

repeatedly until the

Set

mode is

displayed.

Press the

Shutter

button to enter the

Set

mode menu.

Press the

Shutter

button again to enter

the

Setup

menu.

Press the

Power/Mode

button

repeatedly to move the highlight to the

Lapse

icon.

Press the

Shutter

button to enter the

Lapse

menu.

Press the

Power/Mode

button

repeatedly to highlight the

Lapse

Mode

icon.

Note: Alternatively, if you enter the menu and do not want

to make any changes, press the Power/Mode button until
the

Exit

menu item is highlighted, then press the Shutter

button to exit the

Lapse

menu.

Press the

Shutter

button to enter the

Lapse

Mode

menu.

Press the

Power/Mode

button

repeatedly to move the highlight to the
capture mode you want to use. You can
select either

Video

Photo

mode.

Summary of Contents for MHD Sport 2.0 Wi-Fi 12570

























































































Search results

Summary of Contents for MHD Sport 2.0 Wi-Fi 12570

Reviews:

Related manuals for MHD Sport 2.0 Wi-Fi 12570

Brands by name

Popular brands

Monoprice MHD Sport 2.0 Wi-Fi 12570, User Manual

Search results

Summary of Contents for MHD Sport 2.0 Wi-Fi 12570

Reviews:

Related manuals for MHD Sport 2.0 Wi-Fi 12570

Brands by name

Popular brands