Mondolfo Ferro AS 924, Operator'S Manual

Page: 75 / 332

AS 924 - AS 924 A Operator's Manual 75
UK
5. Never bring your head or other
body parts close to a tyre
during inflation or bead inser-
tion operations. This machine
is not a safety device against
the possible explosion risk of
tyres, air chambers or rims.
6. During inflation operations,
remain at a safe distance from
the tyre changer to ensure you
are outside of the vertical cylindrical volume occupied by the wheel. Do not approach.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly with the rim dimensions (printed inside the rim) or if the rim or the tyre are
defective or damaged.
Never exceed the pressure recommended by the tyre manufacturer.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep all persons not working on the machine out of the working area.
DANGER
7. Crushing Hazard. Moving Parts Present. Contact with moving parts could result in an
accident.
The machine may only be used by one operator at a time.
• Keep all bystanders clear of tire changer.
• Keep hands and fingers clear of rim edge during the demounting
and mounting process.
• Keep hands and fingers clear of mount/demount head during op-
eration.
• Keep hands and other body parts away from moving parts.
• Do not use tools other than those supplied with tyre changer.
• Use lubricant that is specific for tyres in order to prevent tyre seizure.
• Pay attention while handling the rim and tyre and while using the lever.
8. Electric Shock Hazard.
• Do not clean the electric parts with water or high pressure air jets.
• Do not operate machine with a damaged power cord.
• If an extension is necessary, use a cable with nominal features equal
to or greater than those for the machine. Cables with nominal features
that are lower to those of the machine could overheat and cause a fire.