24
Monark 928 G3 / 928 G3r
Troubleshooting guide
Symptoms
Probable Cause / Corrective Action
The Display is not working
Check that there is power in the socket and that no fuse has blown.
•
If there is power in the socket but the display still does not work,
•
contact the • service centre.
No heart rate
Check the chest belt (battery). Wet the thumbs and place them on the
•
electrodes. A low clicking sound will appear near battery lid while
you click on the electrodes with one thumb. Use another external HR
monitor to check the belt.
Check that the chest belt is positioned correctly on test person and
•
tight enough. Check that the electrodes are wet, in difficult cases it is
necessary to use a contact gel or a mixture of water with a few drops
of washing-up liquid. The level for HR signal can vary from person to
person. Put chest belt on another known person who has a good pulse
reading.
Uneven Heart rate
Use an external unit, for example a HR watch, to check if it also
•
indicates irregular pulse. If this is the case there are probably a
disturbance in the room. The disturbance may be electronic fields from
power cables, elevators, lamps etc. or other electronic devices which
are too close (eg. cell phones). Move the bike to a different location
in the room or change rooms. If an irregular HR remains it should be
checked manually. If the HR remains irregular at work the person's
health should be examined.
There is a click noise when pedalling
(increases with the weight)
The pedals are not tight. Tighten them or change pedals.
•
The crank arms is loose. Check, tighten.
•
The base bearing is loose. Contact your dealer for service.
•
There’s a click noise and a squeak noise
when pedalling
Loosen the chain.
•
CalErr shows in the display
Incorrect calibration or not calibrated at all. Calibrate the Ergometer.
•
Pendulum pointer scrapes in the scale
Try to bend the scale slightly inwards
•
Scale plate scrapes in the pendulum
Try to bend the scale plate slightly outwards
•
Problems with the computer software
Describe the problem in an e-mail (in English) and send it to the
•
software developer HUR labs support: [email protected]
Summary of Contents for 928 G2
Page 1: ...EN Manual for 928 G3 928 G3r...
Page 2: ......
