GB
38
8
Specifications
Number of
zones (loops):. . . . . . . . 8 zones, features can be
programmed;
1 anti-tamper loop for all
alarm sensors together;
1 anti-tamper loop for one
alarm unit
Max. admissible
resistance of a loop: . . . 2 k
Ω
Trigger time: . . . . . . . . . 300 ms
Entry delay: . . . . . . . . . adjustable from 0 s to 198 s,
default setting 40 s
Exit delay:. . . . . . . . . . . adjustable from 0 s to 99 s,
default setting 30 s;
the delay can, however, also
be terminated much earlier
or later by activating an “ET”
zone (Exit Terminator)
Alarm time: . . . . . . . . . . adjustable from 1 to 99 min.,
default setting 20 minutes
Default setting =
factory default . . . . . . . see table fig. 16
on the following page
Number of
access codes: . . . . . . . 1 code for programming,
max. 9 codes for the oper-
ators
Log: . . . . . . . . . . . . . . . 64 events with indication of
date and hour (default
setting) or
256 events without further
indications
Power supply:. . . . . . . . 230 V~/50 Hz/50 VA and
12 V rechargeable battery,
min. 2 Ah
Current consumption
stand-by
alarm control
system: . . . . . . . . . 12 V, max. 50 mA
for each keypad
controller: . . . . . . . 12 V, max. 40 mA
in case of alarm:. . . . depending on the connected
signal devices
Mains failure fuse: . . . . via 12 V rechargeable battery
Fuses
mains fuse:. . . . . . . . 125 mA, slow-blow
F1 for siren,
strobelight,
12 V AUX: . . . . . . 1 A quick acting
F2 for the keypad
controllers:. . . . . . 250 mA, quick-acting
Ambient temperature:. . 0 – 50 °C
Dimensions
alarm control system: 250 x 195 x 75 mm
keypad controller:. . . 90 x 115 x 25 mm
Weight
alarm control system: 1.3 kg
keypad controller:. . . 150 g
Subject to technical modification.
Summary of Contents for security DA-8000
Page 83: ...79...
