Molecular Devices AquaMax 2000, User Manual

Page: 33 / 158

Getting Started
0112-0151 K 33
6 Rinse–Runs the one-touch rinse program.
The one-touch rinse program runs the standard rinse cycle three
times to flush the internal fluidics with rinse solution from the default
green inlet. At the end of the rinse program, the system drains the
rinse solution from the fluid paths.
7 Program List–Displays a list of the user-defined programs in the
program library. The number to the right of the program name (96 or
384) refers to the plate type used.
• Red indicates that the program uses a plate type that has been
changed since the program was last saved. When you run a red
program, an error message prompts you to accept the plate
parameter change before the program runs.
• Gray indicates that the program is not compatible with the
installed wash head. You cannot run gray programs.
8,10 Up Arrow and Down Arrow–Scroll the list if the number of programs
exceeds the display area.
9 Head–Identifies the installed wash head or cell head:
• PW96 : 96-well plate wash head
• PW384 : 384-well plate wash head
• CW96 : 96-well cell wash head
• CW384 : 384-well cell wash head
Table 3-1: Main tab (cont’d)
Item Description
Note: One-touch programs can be edited and copied like any other
programs, but they cannot be renamed or deleted.
Note: Only program settings applicable to the installed wash head are
available in the on-screen menus.