16: Quartz Lamp Replacement
Ensure appliance is disconnected from mains before servicing.
Lamps should not be touched with bare hands, as this may cause premature
failure. If lamp is touched, wipe clean with a cloth and alcohol prior to use.
Replacement quartz lamps must never exceed the loading specified.
Wear safety glasses. Don’t touch hot halogen bulbs.
Only use replacement bulbs that match the wattage and design of the fixture.
1.
Isolate appliance from power supply and allow cooling
down before commencing lamp replacement.
2.
Carefully slide mesh guard to one side until it clears the bulb area.
3.
Remove faulty lamp by pushing to one side then pull down.
Hold the insulated end of the new lamp (Any end).
4.
At a slight angle, slot the end of the new lamp into one of the Housing
5.
Push against the sprung contact & hold it there.
6.
Raise the opposite end of the lamp into the other end of the Lamp.
31