The ‘Floating Platform’ is supported by an equal amount of tension springs on each
corner. The number of springs equates to the size of plate being used. Use the chart
below as a starting point; add or remove springs accordingly (in groups of four, one
in each corner) until the top plate is at the required serving level).
The Springs are held in place using a hook & eye arrangement top & bottom. They can
be easily attached or detached by just hooking or unhooking the end in to or out of the
corresponding hole on the Floating support Arm.
Plate
Diameter
8” (203mm)
9” (229mm)
10” (254mm)
11” (279mm)
12” (305mm)
Number of
Springs on Each
Corner
2
3
4
5
6
Total Number of
Springs
8
12
16
20
24
11: Carvery station
21