11: Carvery station
In-counter spring-loaded pop-up plate dispensers with a variable spring system
to accommodate different plate weights. Ideal for oval, round & square crockery
including bowls up to 305mm (12”).Each tube can take a maximum of 65 plates
(Depending on type of plate used).
Setting the Spring Tension
Plates sits on a removable Plate Base Support which in turn rests on a floating platform.
This ‘Floating Platform’ in turn, is supported by several tension springs. The tension springs
are fastened symmetrically on two sides.
In order to access the tension springs the
Plate Base Support needs to be removed.
1.
Remove lid & store in safe place.
2.
Lift out plate/bowl carriage & store in safe place.
3.
Unscrew the 4 bolts which secure the two inner panels and remove.
4.
Adjust the springs (refer to page 21).
5.
Relocate the inner panels. 2 Tabs on the bottom 2 screws on the top of each.
20