Moeller S40-AM-TD, Manual

Page: 51 / 85

Function Blocks
48
02/02 AWB27-1300-GB
Time_gap_time 0 to 2550 ms Time for masking gaps in the receive frame. This is
required when using wireless modems. A value of
50 ms must be set.
Time_cts_timeout 0 to 2550 ms Timeout time for monitoring the CTS signal line if:
RTS = 1
If no CTS signal is detected after this time, the send
operation is aborted with “fail_code” = 62. If time
value = 0, the CTS timeout time is set internally to
500 ms.
Time_rts_delay_off 0 to 2550 ms RTS off delay; The RTS control line is reset after a send
frame with a delay equal to the time set, and the
receive buffer for masking out interference is disabled.
RTS_delay_init 100 to
25500 ms Start delay on autostart after cold or warm start for
bridging the self diagnostics times of modem and
telecontrol modules.
This state is indicated as follows:
– WAIT MODEM CHECK
modem_code=24 ( a table 8, page 43)
RTS_delay_init_GSM 100 to
25500 ms As “RTS_delay_init”, only for GSM modems
Time_delay_first 100 to
25500 ms Delay after connection establishment (connect
message) before the 1st service is sent.
Time_delay_short
1)
100 to
25500 ms
Time_delay_long
1)
100 to
25500 ms
Parameter Value range Description