Moeller S40-AM-TD, Manual

Page: 40 / 85

Parameter function block
37
02/02 AWB27-1300-GB
Table 5: Inputs for the telecontrol function
Inputs Data
type Value
range Description
strobe BOOL 0/1 Start of the service defined at “command”.
Active only when “ready” =1
requested_station USINT 1 to x Partner station to which a connection is to be
established.
The upper value limit depends on the telecontrol
function block selected.
command USINT 10 to 33 Command code for the services offered,
a
table 11 on page 51.
lock_data BOOL 0/1 “lock_data” = 1 disables the writing of the
data array.
lock_time BOOL 0/1 “lock_time” = 1 means that time
synchronisation is disabled.
lock_flash BOOL 0/1 “lock_flash” = 1 means that writing of the flash
is disabled or is not available.
user_status_1 BOOL 0/1 User status bit 1
user_status_2 BOOL 0/1 User status bit 2
user_status_3 BOOL 0/1 User status bit 3
user_status_4 BOOL 0/1 User status bit 4
tra_status WORD 0 to 65535 Status word
The status word is automatically transferred
after every connection establishment and when
service 31 is carried out between stations
(is indicated in the partner station in the
status array).
tra_variable_
length USINT – Data length in the case of variable length frames.
tra_subaddress USINT 0 to 255 Definition of the subaddress for variable length
frames
tra_source_offset USINT 0 to 219 Source offset address for variable length frames