Overview with stand-alone
display/operating unit
253
05/04 AWB2528-1508GB
The help provides all the additional information about
EASY-SOFT-BASIC that you will need.
If there are transmission problems, easy will display the
INVALID PROG message.
X
Check whether the circuit diagram is suitable for the
destination device.
Figure 92: Removing
the EASY-PC-CAB
X
After transmission, remove the cable and close the cover.
Overview with stand-
alone display/operating
unit
easy500 and easy700 can be operated with a stand-alone
display/operating unit. In this configuration, all the display
information is transferred via the easy interface.
This has the advantage that easy can be operated remotely.
The texts in easy are backlit and displayed on the front of the
operator or control panel in twice the size. The display/
operating unit provides protection to IP65.
INVALID PROG
h
If the operating voltage fails during communication with
the PC, repeat the last step. It is possible that not all the
data was transferred between the PC and easy.
For Immediate Delivery call KMParts.com at (866) 595-9616