easy Settings
204
05/04 AWB2528-1508GB
Password setup
A password can be set up via the System menu in either RUN
or STOP mode. You cannot change to the System menu if a
password is already activated.
X
Press
DEL
and
ALT
to call up the System menu.
X
Select the menu option SECURITY… to enter the
password.
X
Press the
OK
button and move to the PASSWORD…
menu.
X
If you press the
OK
button again, you will access the
password entry area.
If no password has been entered, easy changes directly to
the password display and displays for XXXX characters: No
password present.
X
Press
OK
, four zeros will appear
X
Set the password using the cursor buttons:
–
ú í
select position in the password,
–
ÍÚ
set a value between 0 to 9.
X
Save the new password by pressing
OK
.
Use
OK
to exit the password display and proceed with
ESC
and
Ú
to the RANGE… menu.
The scope of the password has not yet been defined. The
password is now valid but not yet activated.
h
A password that has been entered in easy is transferred to
the memory card together with the circuit diagram,
irrespective of whether it was activated or not.
If this easy circuit diagram is loaded back from the memory
card, the password will also be transferred to easy and is
activated immediately.
ENTER PASSW
âXXX
ENTER PASSW
0042
For Immediate Delivery call KMParts.com at (866) 595-9616