31
05/04 AWB2528-1508GB
2
Installation
easy must only be installed and wired up by trained
electricians or other persons familiar with the installation of
electrical equipment.
easy is installed in the following order:
• If necessary connect devices together
• Mounting
• Wiring up the inputs
• Wiring up the outputs
• Connecting the power supply
Mounting
Install easy in a control cabinet, service distribution board or
in an enclosure so that the power feed and terminal
connections cannot be touched accidentally during
operation.
Clip easy onto a DIN EN 50022 top-hat rail or fix easy in
place using fixing brackets. easy can be mounted vertically
or horizontally.
j
Danger of electric shock
Never carry out electrical work on the device while the
power supply is switched on.
Always follow the safety rules:
• Switch off and isolate
• Secure against reclosing
• Ensure that the device is no longer live
• Cover adjacent live parts
h
When using easy with expansion units, connect the
expansion concerned before mounting (
a
page 34).
For Immediate Delivery call KMParts.com at (866) 595-9616