modbar Pour-Over, Manual, Page: 4 / 58

EN
4
in observance of all local,
national, and international
electrical codes and safety
regulations, and particularly
by grounding the unit.
Make sure grounding has
been done properly as it
represents a fundamental
safety requirement. Ensure
qualified personnel check
such connection.
• Improper use or installation
of Modbar equipment can
cause product damage and
or serious injury to end user.
Modbar will not be held
responsible for any damages
or injuries occurring if
equipment has been misused,
installed
improperly, or
tampered with.
• When you receive your
equipment, thoroughly
inspect the packaging and
equipment for any signs
of damage. If damage is
suspected, please contact
Modbar
support before
attempting to install or
operate the equipment.
• Modbar equipment is not
intended for use outdoors
or in an unconditioned
environment where freezing
temperatures may occur.
• Do not leave machine
unattended during brewing
processes.
• Do not use wet cloth to clean
screens or switches on unit(s)
as they are not waterproof.
• Repairs to Modbar
equipment should be made
only by trained technicians
and
use only Modbar
approved parts.
• Incorrect installation may
cause injury and/or damages
to people, animals, or objects,
for which the manufacturer
shall not be held responsible.
• We do not recommend
using adapters, multiple
plugs and/or extension cords.
If you cannot avoid using
them, make sure that they are
exclusively of the kind which
conforms to local, national,
and international electrical
codes and safety regulations,
being careful not to exceed
the power and current ratings
indicated on such adapters
and extension cords.
• This device must be used
exclusively for the functions
which it has been designed
and built for. Any other
application is inappropriate